{"product_id":"ngk-p519a-96341","title":"NGK P519A-96341 Radiator Cap 96341 Standard Type","description":"\u003cp\u003e【NGK P519A-96341 Radiator Cap 96341 Standard Type】\n\u003cbr\u003e■Product Description\n\u003cbr\u003eNTK radiator caps maintain the proper pressure inside the radiator through the action of the main pressure valve (pressure valve) and the vacuum valve.\n\u003cbr\u003eWhen the temperature rises and the pressure becomes too high, the main pressure valve inside the cap operates to adjust the pressure.\n\u003cbr\u003eWhen the temperature drops and the pressure decreases, the vacuum valve operates to maintain the proper pressure inside the radiator. \u003c\/p\u003e\n\n\u003cp\u003eSpecifications\n\u003cbr\u003eOpening pressure: 88kPa (0.9kg\/cm2)\n\u003cbr\u003eNTK radiator caps prevent engine overheating by increasing the pressure inside the radiator, which raises the boiling point of the coolant. For example, with an opening pressure of 88kPa, the boiling point of water becomes approximately 120℃, which is a 20℃ increase compared to normal.\n\u003cbr\u003e【Features】\n\u003cbr\u003eThe main components are made of rust-resistant and stable materials.\n\u003cbr\u003eEach component is optimally designed for excellent strength and durability.\n\u003cbr\u003eThe rubber material for the seal is made of a material with improved heat resistance and LLC resistance.\n\u003cbr\u003e【Side Effects of a Faulty Radiator Cap】\n\u003cbr\u003eDeterioration or deformation of the seal, damage to the seal, or dirt, rust, or deposits inside the radiator cap can impair the operation of the main pressure valve and vacuum valve, leading to overheating.\n\u003cbr\u003e【Replacement Procedure】\n\u003cbr\u003eRemoving the radiator cap when the coolant temperature is high immediately after stopping the engine can cause hot water and steam to spurt out,\n\u003cbr\u003eposing a risk of burns.\n\u003cbr\u003ePlease perform the work after the engine has sufficiently cooled down and the water temperature has dropped.\n\u003cbr\u003e1. Prepare a towel or similar item.\n\u003cbr\u003e2. Cover the radiator cap with the towel and slowly loosen it.\n\u003cbr\u003eStop midway to release the pressure inside the radiator.\n\u003cbr\u003e3. After releasing the pressure, slowly remove the radiator cap.\n\u003cbr\u003eBe careful not to remove it all at once, as hot water and steam may spurt out.\n\u003cbr\u003e4. Check the condition of the removed radiator cap.\n\u003cbr\u003e5. Check the operating condition of the radiator cap with a radiator cap tester.\n\u003cbr\u003eEven if the radiator cap appears to be in good condition, the opening pressure may have decreased due to spring fatigue.\n\u003cbr\u003e6. When installing a new radiator cap, tighten it securely until the claws meet the stopper position.\n\u003cbr\u003eType: Standard Type\n\u003cbr\u003eCompatible Manufacturers: Toyota \/ Mazda \/ Mitsubishi\n\u003cbr\u003eCompatible Genuine Part Numbers: 16401-36011, SE01-15-205, MB110314 \u003c\/p\u003e\n\n\u003cp\u003e■Notes on Images\n\u003cbr\u003e*Images are for illustration purposes only. Includes products of different sizes and colors. Product design and specifications may change without notice. Please be aware of this. \u003c\/p\u003e\n\n\u003cp\u003e■Precautions\n\u003cbr\u003eWhen inspecting or replacing, always stop the engine and perform the work with the engine cool. This can cause fires and burns.\n\u003cbr\u003eDo not use on vehicles other than those for which it is adapted. This can cause overheating.\n\u003cbr\u003ePlease be sure to check the year, model, and engine type of your vehicle with your vehicle inspection certificate.\n\u003cbr\u003eEven if the year, model, and engine type of your vehicle are the same, the appropriate radiator cap may differ, so please check the actual product (shape and pressure).\n\u003cbr\u003eImmediately after driving, the coolant is under pressure, and when the radiator cap is removed, hot water and steam may spurt out, posing a risk of burns. Please remove it after the engine has sufficiently cooled down and the water temperature has dropped.\n\u003cbr\u003eAfter removing the old radiator cap, if there are any foreign objects attached to the mounting surface, wipe them clean before installing the new radiator cap.\n\u003cbr\u003eWhen installing the radiator cap, make sure to install it securely until the claws of the radiator cap meet the stopper position of the mounting port on the radiator body.\u003c\/p\u003e","brand":"日本特殊陶業(NGK)","offers":[{"title":"Default Title","offer_id":46119112114411,"sku":"ngk-p519a-96341","price":604.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/ngk-radiatorcap.jpg?v=1737444656","url":"https:\/\/bikeman.jp\/en\/products\/ngk-p519a-96341","provider":"バイクマン","version":"1.0","type":"link"}