{"product_id":"ngk-p561a-93612","title":"NGK P561A-93612 Radiator Cap 93612 Standard Type","description":"\u003cp\u003e【NGK P561A-93612 Radiator Cap 93612 Standard Type】\n\u003cbr\u003e■Product Description\n\u003cbr\u003eNTK radiator caps maintain proper pressure within the radiator through the action of the main pressure valve (pressure valve) and the negative pressure valve.\n\u003cbr\u003eWhen the temperature rises and the pressure becomes too high, the main pressure valve inside the cap activates to adjust the pressure.\n\u003cbr\u003eConversely, when the temperature drops and the pressure becomes low, the negative pressure valve activates to maintain proper pressure within the radiator.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications\n\u003cbr\u003eOpening pressure: 108kPa (1.1kg\/cm2)\n\u003cbr\u003eNTK radiator caps prevent engine overheating by increasing the pressure inside the radiator and raising the boiling point of the coolant. For example, with an opening pressure of 88kPa, the boiling point of water rises to approximately 120℃, which is 20℃ higher than normal.\n\u003cbr\u003e【Features】\n\u003cbr\u003eKey components are made of rust-resistant and stable materials.\n\u003cbr\u003eIndividual parts are optimally designed for strength and durability.\n\u003cbr\u003eHeat-resistant and LLC-resistant materials are used for the sealing rubber.\n\u003cbr\u003e【Side effects of a faulty radiator cap】\n\u003cbr\u003eDeterioration or deformation of the seal, damage to the seal, or dirt, rust, or deposits inside the radiator cap can impair the operation of the main pressure valve and negative pressure valve, leading to overheating.\n\u003cbr\u003e【Replacement Procedure】\n\u003cbr\u003eRemoving the radiator cap when the coolant temperature is high, immediately after stopping the engine, can cause hot water or steam to spray out,\n\u003cbr\u003eposing a risk of burns.\n\u003cbr\u003ePlease wait until the engine has sufficiently cooled down and the water temperature has dropped before performing the work.\n\u003cbr\u003e1. Prepare a towel.\n\u003cbr\u003e2. Place the towel over the radiator cap and slowly loosen it.\n\u003cbr\u003eStop halfway to release the pressure inside the radiator.\n\u003cbr\u003e3. After releasing the pressure, slowly remove the radiator cap.\n\u003cbr\u003eBe careful not to remove it all at once, as hot water or steam may spray out.\n\u003cbr\u003e4. Check the condition of the removed radiator cap.\n\u003cbr\u003e5. Use a radiator cap tester to check the operating condition of the radiator cap.\n\u003cbr\u003eEven if the radiator cap appears to be in normal condition, the opening pressure may have decreased due to spring fatigue.\n\u003cbr\u003e6. When installing a new radiator cap, tighten it securely until the tab reaches the stopper position.\n\u003cbr\u003eType: Standard type\n\u003cbr\u003eCompatible manufacturers: Isuzu\/Suzuki\/Subaru\/Daihatsu\/Toyota\/Nissan\/Honda\/Mazda\/Mitsubishi\u003c\/p\u003e\n\n\u003cp\u003e■Notes on images\n\u003cbr\u003e*Images are for illustration purposes only. Includes products with different sizes and colors. Product design and specifications are subject to change without notice. Please understand.\u003c\/p\u003e\n\n\u003cp\u003e■Precautions\n\u003cbr\u003eWhen inspecting or replacing, always stop the engine and perform the work when the engine has cooled down. This can cause fires and burns.\n\u003cbr\u003eDo not use on vehicles other than those for which it is suitable. This can cause overheating.\n\u003cbr\u003eAlways check the vehicle's model year, vehicle type, and engine type using documents such as the vehicle inspection certificate.\n\u003cbr\u003eEven if the vehicle's model year, vehicle type, and engine type are the same, the appropriate radiator cap may differ, so please check the actual product (shape and pressure).\n\u003cbr\u003eCoolant immediately after driving is pressurized, and removing the radiator cap can cause hot water or steam to spray out, posing a risk of burns. Please wait until the engine has sufficiently cooled down and the water temperature has dropped before removing it.\n\u003cbr\u003eAfter removing the old radiator cap, if there is any foreign matter on the mounting surface, wipe it clean before installing the new radiator cap.\n\u003cbr\u003eWhen installing the radiator cap, ensure it is securely fitted until the tab of the radiator cap touches the stopper position of the radiator body's inlet.\u003c\/p\u003e","brand":"日本特殊陶業(NGK)","offers":[{"title":"Default Title","offer_id":46119112671467,"sku":"ngk-p561a-93612","price":436.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/ngk-radiatorcap_b7fcb2a1-376e-4f63-b054-6e619c99f70d.jpg?v=1737444683","url":"https:\/\/bikeman.jp\/en\/products\/ngk-p561a-93612","provider":"バイクマン","version":"1.0","type":"link"}