{"product_id":"plot-egh011","title":"Grip Heater, Integrated Switch, for φ22.2, 115\/120\/130mm, Grip Outer Diameter φ33","description":"【Effex EGH011 Heated Grips with Integrated Switch for φ22.2 Handlebars, 115\/120\/130mm, Grip Outer Diameter φ33, 12V Vehicles Only】\u003cbr\u003e\n ■ Integrated switch molded into the left grip.\u003cbr\u003e\n Compatible with grip lengths of 115\/120\/130mm using the included extended sleeves.\u003cbr\u003e\n Suitable for φ22.2 handlebars and 12V vehicles only.\u003cbr\u003e\n Grip outer diameter is φ33mm.\u003cbr\u003e\n Includes protective heat shrink tubing.\u003cbr\u003e\n Grip design ensures reliable maneuverability and heat conduction.\u003cbr\u003e\n Integrated switch allows for smart operation.\u003cbr\u003e\n 5-stage temperature adjustment indicated by 5-color LED lamps.\u003cbr\u003e\n Three sizes of extended sleeves allow grip length adjustment to 115\/120\/130mm.\u003cbr\u003e\n Removable bar end caps accommodate both bar-end and non-through type handlebars.\u003cbr\u003e\n ■ Specifications\u003cbr\u003e\n Grip outer diameter: φ33\u003cbr\u003e\n Compatible handlebar diameter: φ22.2 (12V vehicles only)\u003cbr\u003e\n Compatible grip length: 115\/120\/130mm\u003cbr\u003e\n ■ Notes\u003cbr\u003e\n * Cannot be used on vehicles with smaller handlebar diameters (less than φ22.2), inch-sized handlebars (φ25.4), or vehicles with low battery capacity or power generation.\u003cbr\u003e\n * When installing the included extended sleeve, apply adhesive to the inner surface of the extended sleeve where it meets the grip, and press firmly. Also, be aware that excessive force on the extended sleeve can lead to its detachment or damage to the grip end and extended sleeve.\u003cbr\u003e\n * Please understand in advance that the perceived temperature may feel lower due to heat radiation to the handlebars, bar ends, and gloves, as well as cooling by the riding wind.\u003cbr\u003e\n * Use a heat gun to install the included grip protective heat shrink tubing. Also, when the heated grips are in use, the installed protective tubing may soften and loosen due to heat, so it is recommended to install it when the heater is not in use.\u003cbr\u003e\n * If the tubing loosens after installation, re-heat shrink it with a heat gun to ensure a tight fit with the grip. If it still does not adhere, it is likely the product has reached the end of its life and should be removed.\u003cbr\u003e\n * Due to the nature of the protective tubing, there is a manufacturing tolerance of approximately ±3mm in total length. Also, the end surface may be slightly slanted, but this is not a defect.\u003cbr\u003e\n * Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.","brand":"エフェックス(EFFEX)","offers":[{"title":"Default Title","offer_id":45469703536875,"sku":"plot-egh011","price":15583.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/plot-egh011.jpg?v=1717666712","url":"https:\/\/bikeman.jp\/en\/products\/plot-egh011","provider":"バイクマン","version":"1.0","type":"link"}