{"product_id":"plot-egh012","title":"Grip heater, separate switch type, for φ22.2, 115\/120\/130mm, grip outer diameter φ33","description":"【EFFEX EGH012 Heated Grips, Separate Switch Type, for φ22.2 Handlebars, 115\/120\/130mm, Grip Outer Diameter φ33, 12V Vehicles Only】\u003cbr\u003e\n ■Separate switch type.\u003cbr\u003e\n Compatible with grip lengths of 115\/120\/130mm using the included extend sleeves.\u003cbr\u003e\n Suitable for handlebar diameter φ22.2 \/ 12V vehicles only.\u003cbr\u003e\n Grip outer diameter is φ33mm.\u003cbr\u003e\n Nichrome wire is wound all the way around.\u003cbr\u003e\n Includes protective heat shrink tubing.\u003cbr\u003e\n Grip design achieves reliable operability and heat conductivity.\u003cbr\u003e\n Compact switch allows 5 levels of temperature adjustment. Temperature level is indicated by 5 LED lamps.\u003cbr\u003e\n Three sizes of extend sleeves allow grip length to be adjusted to 115\/120\/130mm.\u003cbr\u003e\n Removable bar end caps allow compatibility with both bar end and non-through types.\u003cbr\u003e\n ■Specifications\u003cbr\u003e\n Grip outer diameter: φ33\u003cbr\u003e\n Compatible handlebar diameter: φ22.2 (12V vehicles only)\u003cbr\u003e\n Compatible grip length: 115\/120\/130mm\u003cbr\u003e\n ■Precautions\u003cbr\u003e\n *Cannot be used on vehicles with smaller handlebar diameters (less than φ22.2), inch bars (φ25.4), or vehicles with low battery capacity\/power generation.\u003cbr\u003e\n *When installing the included extend sleeves, apply adhesive to the inner surface of the extend sleeve where it meets the grip, and firmly press them together. Also, please be aware that extreme stress on the extend sleeve may lead to its detachment or damage to the grip end and extend sleeve.\u003cbr\u003e\n *Please understand in advance that the perceived temperature may feel lower due to heat dissipation to the handlebars, bar ends, and gloves, and cooling by riding wind.\u003cbr\u003e\n *When installing the included grip protective heat shrink tubing, use a heat gun. Also, when the grip heater is on, the installed protective tubing may soften and loosen due to heat, so we recommend installing it during seasons when the heater is not in use.\u003cbr\u003e\n *If the tube loosens after installation, re-heat shrink it with a heat gun to adhere it tightly to the grip. If it still does not adhere, the product is likely at the end of its life and should be removed.\u003cbr\u003e\n *Due to the nature of the protective tube, the total length has a tolerance of approximately ±3mm. Also, the end face may be slightly slanted, but this is not a defect.\u003cbr\u003e\n *The images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.","brand":"エフェックス(EFFEX)","offers":[{"title":"Default Title","offer_id":45469707665643,"sku":"plot-egh012","price":8250.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/plot-egh012.jpg?v=1717666726","url":"https:\/\/bikeman.jp\/en\/products\/plot-egh012","provider":"バイクマン","version":"1.0","type":"link"}