{"product_id":"tk-02-01-0456","title":"Special Clutch Kit TYPE-R (WET\/Wire Type) Slipper Clutch Specification Monkey Gorilla CD50","description":"\u003cp\u003e【SP Takegawa 02-01-0456 Special Clutch Kit TYPE-R (WET\/Wire Type) Slipper Clutch Specification for Monkey Gorilla CD50 Engine Parts Takegawa】\n\u003cbr\u003e■Product Description\n\u003cbr\u003eAchieves increased clutch capacity by using 6 discs while reducing the rotating mass weight.\n\u003cbr\u003eFor vehicles equipped with SP Takegawa's wet-compatible cross mission.\n\u003cbr\u003eSP Takegawa cross mission kits vary depending on the vehicle. Please be aware.\n\u003cbr\u003eThis kit is a slipper clutch specification.\u003c\/p\u003e\n\n\u003cp\u003e■Detailed Description\n\u003cbr\u003e●Die-cast aluminum R. crankcase cover\n\u003cbr\u003eThe right crankcase cover is made of die-cast aluminum.\n\u003cbr\u003eThe cover surface is silver painted.\n\u003cbr\u003eThe right crankcase cover shape can be used for both wet and dry clutches.\n\u003cbr\u003eEven after purchasing a special (wet) clutch, you can change it to a dry clutch.\n\u003cbr\u003e*Separate purchase of SP Takegawa specified parts is required for specification changes.\n\u003cbr\u003e●Forged aluminum clutch cover (wire type)\n\u003cbr\u003eThe wire-type clutch uses a rack \u0026 pinion system, known for its light and smooth operation.\n\u003cbr\u003eThe cover is made of forged aluminum and has a shot-blasted surface.\n\u003cbr\u003eEven after installing the special clutch, the clutch springs, clutch plates, and clutch friction discs can be easily replaced by removing the clutch cover.\n\u003cbr\u003e●Large oil filler cap\n\u003cbr\u003eThe larger oil filler opening makes oil changes easier.\n\u003cbr\u003eMade of die-cast aluminum with a chrome-plated finish.\n\u003cbr\u003e●Built-in oil element\n\u003cbr\u003eFilters impurities such as sludge and metal wear particles in the oil.\n\u003cbr\u003eBy removing impurities from the oil, engine output can be maintained.\n\u003cbr\u003eA reliable cartridge-type paper oil element is used.\n\u003cbr\u003e●With oil level check window\n\u003cbr\u003eEasily check the oil level.\n\u003cbr\u003eDurable glass is used for the engine oil check window.\n\u003cbr\u003e●Special Clutch Inner Kit TYPE-R (WET\/Slipper Specification)\n\u003cbr\u003e●Clutch unit change\n\u003cbr\u003eBy changing the clutch unit from the normal crankshaft (primary side) to the transmission main shaft (secondary side), the load on the crankshaft is reduced, and the weight of the crankshaft axis can be reduced, resulting in light throttle response.\n\u003cbr\u003e●6-disc specification\n\u003cbr\u003eCompared to conventional products, by reducing the diameter of rotating parts such as the clutch outer, we have achieved a reduction in horsepower loss due to oil diffusion, improved response, and a reduction of approximately 12% in rotating mass weight, transmitting engine power efficiently.\n\u003cbr\u003eSix friction discs are used to achieve a 6-disc configuration.\n\u003cbr\u003eThis increases the clutch capacity by approximately 20% compared to conventional products, making it suitable for high-output engines.\n\u003cbr\u003e●Slipper clutch (standard equipment)\n\u003cbr\u003eMitigates sudden engine braking shock caused by downshifting at high RPMs.\n\u003cbr\u003eThis reduces sudden changes in posture, rear wheel hopping, and engine load.\n\u003cbr\u003e●Slipper clutch structure\n\u003cbr\u003eA dedicated pressure plate and clutch cam are provided in the clutch section.\n\u003cbr\u003eBack torque transmitted from the rear wheel is transmitted to the clutch cam, causing the cam on the pressure plate and the clutch cam to operate, pushing down the pressure plate to create a semi-clutched state and release the back torque.\n\u003cbr\u003e●Clutch outer\n\u003cbr\u003eEquipped with an internal rubber damper to reduce shock during clutch engagement and gear changes.\n\u003cbr\u003e●Die-cast aluminum lifter plate\n\u003cbr\u003e●Clutch spring\n\u003cbr\u003eExcellent fatigue resistance and stable clutch feel are achieved.\u003c\/p\u003e\n\n\u003cp\u003e■Compatible Models\n\u003cbr\u003eHONDA\n\u003cbr\u003e6V Monkey\/Gorilla (Z50J-1300017 ～1805927)\n\u003cbr\u003e12V Monkey (Z50J-2000001～\/AB27-1000001～1899999)\n\u003cbr\u003e12V Gorilla (Z50J-2500001～\/AB27-1000001～1899999)\n\u003cbr\u003eMonkey (FI) (AB27-1900001～)\n\u003cbr\u003eBenly CD50 (CD50-2500001～)\n\u003cbr\u003eBenly CD50S (CD50-220005～)\n\u003cbr\u003eCD50 (CD50-2000001～)\n\u003cbr\u003e*Simultaneous installation of SP Takegawa's wet-compatible cross mission is required.\u003c\/p\u003e\n\n\u003cp\u003e■Notes\n\u003cbr\u003e*The image is for illustration purposes only. It includes products with different sizes and colors.\n\u003cbr\u003e*Product design and specifications are subject to change without notice. Please be aware.\n\u003cbr\u003e*Must be used in conjunction with a bore-up kit with a decompression function. (Excludes SP Takegawa Desmo heads)\n\u003cbr\u003e*Simultaneous installation of SP Takegawa's wet-compatible cross mission is required.\n\u003cbr\u003e*When installing on Monkey\/Gorilla (Z50J-1300017～1600007) vehicles: The included clutch cable does not support the normal clutch holder, so replace the handlebar pipe and use an SP Takegawa clutch lever or a combination switch with a clutch lever.\n\u003cbr\u003e*Normal mufflers and up mufflers cannot be installed simultaneously.\n\u003cbr\u003e*When installing on Benly CL50: The clutch cable (850mm) included in this kit is not long enough. (When using normal handlebars) A separate clutch cable (910mm) needs to be purchased. Also, because the front stay nut of the normal up muffler interferes, the engine mount bolt needs to be inserted in the opposite direction.\n\u003cbr\u003e*To install a normal up muffler, it is necessary to cut off the stay at the engine mount part in the middle of the muffler.\n\u003cbr\u003e*Since this product is made to order, cancellations after ordering are not possible.\n\u003cbr\u003e*As this is a build-to-order product, it may take some time for delivery. Please also note that the manufacturer may discontinue the product or change specifications without prior notice. Thank you for your understanding.\u003c\/p\u003e","brand":"スペシャルパーツ武川(SPECIAL PARTS TAKEGAWA)","offers":[{"title":"Default Title","offer_id":47208286453995,"sku":"tk-02-01-0456","price":126176.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/tk-02-01-0456.jpg?v=1766739288","url":"https:\/\/bikeman.jp\/en\/products\/tk-02-01-0456","provider":"バイクマン","version":"1.0","type":"link"}