{"product_id":"tk-05-12-0004","title":"Heated Grips, Wrap-around Type, USB\/Type-A, 100x130mm, Universal","description":"\u003cp\u003e【SP武川 05-12-0004 Heat Grips, Wrap-around Type, USB\/TYPE-A, 100x130mm, Universal, Grip Heater, Winter, Touring, Takegawa】\n\u003cbr\u003e■Product Description\n\u003cbr\u003eThis product is a wrap-around type heat grip that can be installed on handle grips with a diameter of φ32mm to φ35mm.\n\u003cbr\u003eThe wrap-around type is easy to install; simply wrap it around the handle grip and secure it with hook-and-loop fasteners.\n\u003cbr\u003eIt can be used on various handle grips, not only for motorcycles, but also for bicycles, brush cutters, snow blowers, fishing rods, electric kick scooters, and more.\n\u003cbr\u003eIn addition, since it uses USB Type-A port power supply, it can be connected to the USB port of a convenient mobile battery or a vehicle-mounted USB port.\n\u003cbr\u003eTemperature adjustment can be selected from 6 levels.\u003c\/p\u003e\n\n\u003cp\u003e■Detailed Description\n\u003cbr\u003e●Uses heat-generating PET metal film\n\u003cbr\u003eConventional grip heaters use heating wires, which take time to conduct heat and cause uneven heating when generating heat.\n\u003cbr\u003eHeat-generating PET metal film has excellent thermal conductivity and can heat uniformly when generating heat.\n\u003cbr\u003eFurthermore, unlike heating wires, heat-generating PET metal film has a large heating area due to its surface contact with the handle grip, which allows for uniform temperature and rapid temperature increase.\n\u003cbr\u003e●Integrated USB Type-A connector and controller\n\u003cbr\u003eTypically, the USB connector, controller, and grip heater are connected by cables, requiring careful placement and securing of the intermediate controller.\n\u003cbr\u003eThis product integrates the controller into the USB Type-A connector, eliminating the need for controller placement or securing, and allowing for a stylish arrangement.\n\u003cbr\u003eAdditionally, by using a flat mesh cable, handling is made easy and cable bulk is minimized.\n\u003cbr\u003e●6-level temperature adjustment function\n\u003cbr\u003eThe controller built into the USB Type-A connector enables 6-level temperature control.\n\u003cbr\u003eIt also features a color lamp display, allowing you to visually confirm the temperature level.\n\u003cbr\u003eRed: 100% Orange: 90% Yellow: 80% Green: 70% Blue: 60% White: 0% (Neutral display)\n\u003cbr\u003e●Equipped with a memory function to record temperature settings\n\u003cbr\u003eSince it records the temperature control setting from the previous use, there is no need to readjust the temperature when turning the power on again.\n\u003cbr\u003eThe grip will warm up to the temperature set during the previous use.\n\u003cbr\u003e●Equipped with an automatic OFF function\n\u003cbr\u003eWhen the controller is used to set the temperature to white 0% (neutral display), it automatically turns off after approximately 10 seconds, reducing power consumption.\u003c\/p\u003e\n\n\u003cp\u003e■Compatible Models\n\u003cbr\u003eUniversal\u003c\/p\u003e\n\n\u003cp\u003e■Specifications\n\u003cbr\u003eType: TYPE-ROLL (wrap-around type)\n\u003cbr\u003eHeater part: 100mm x 130mm\n\u003cbr\u003eThickness: 2mm\n\u003cbr\u003eCable length: 1130mm (including USB connector part)\n\u003cbr\u003eGrip width (overall length): 100mm or more\n\u003cbr\u003eGrip diameter: Approximately φ32mm to φ35mm\n\u003cbr\u003eVehicles with 5V USB port (5V 2.1A or more), or mobile battery use (5V 2.1A or more)\n\u003cbr\u003eUSB TYPE-A\u003c\/p\u003e\n\n\u003cp\u003e■Notes\n\u003cbr\u003e*Images are for illustration purposes only. May include products of different sizes or colors.\n\u003cbr\u003e*Product design and specifications are subject to change without notice. Please understand.\n\u003cbr\u003e*When using this product, a power supply USB TYPE-A port or a mobile battery is required. If the USB port cannot stably output 5V 2.1A, the heat generation may be insufficient, and the product may not perform as intended. Simultaneous use with other devices on an aftermarket 2-port USB type may also lead to insufficient heat generation. Mobile use time目安: 10000mA\/h MAX level (Red LED: 100% use) approx. 1.5 hours, LOW level (Blue LED: 60% use) approx. 4.5 hours. Varies depending on battery degradation.\n\u003cbr\u003e*Although it can withstand rain and snow, the heat grips are not completely waterproof. If wet after use, please ensure they are completely dry before using again.\n\u003cbr\u003e*Ensure that the USB TYPE-A connector and USB TYPE-A port do not get wet in rain or snow to prevent malfunction.\n\u003cbr\u003e*Heat grips tend to cool down if exposed directly to riding wind. Installing knuckle guards or handlebar covers simultaneously can help counteract temperature drops.\u003c\/p\u003e","brand":"スペシャルパーツ武川(SPECIAL PARTS TAKEGAWA)","offers":[{"title":"Default Title","offer_id":47208319385835,"sku":"tk-05-12-0004","price":5076.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/tk-05-12-0004.jpg?v=1766742323","url":"https:\/\/bikeman.jp\/en\/products\/tk-05-12-0004","provider":"バイクマン","version":"1.0","type":"link"}