{"product_id":"zcoo-zrm-t002","title":"Brake pads Sintered ceramic","description":"\u003cp\u003e【ZCOO ZRM-T002 Brake Pads Ceramic Sintered Motorcycle Parts Custom Parts Brake Related Parts】\n\u003cbr\u003e■Product Description\n\u003cbr\u003eCeramic sintered brake pads that provide braking power proportional to how hard you squeeze the lever.\n\u003cbr\u003eThese pads were developed and set to provide braking power that feels like gently tightening a silk thread, rather than an abrupt, powerful stop, with effectiveness increasing proportionally to how hard the lever is squeezed.\n\u003cbr\u003eFurthermore, to achieve smooth and precise deceleration, we pursued a \"comfortable deceleration experience\" where the rider feels the bike decelerating more than they perceive.\n\u003cbr\u003eSince there is little temperature dependence (※1) that is common with racing brake pads, they can be used safely on public roads.\n\u003cbr\u003e(※1) This refers to the phenomenon where braking effectiveness is not achieved unless a certain temperature range is reached.\n\u003cbr\u003eDimensions: 51.5 x 89.7\u003c\/p\u003e\n\n\u003cp\u003e■Specifications\n\u003cbr\u003eSize: 51.5 x 89.7\u003c\/p\u003e\n\n\u003cp\u003e■Other Notes\n\u003cbr\u003e・Brake pads are critical safety components, so replacement and installation are recommended to be performed by certified workshops and qualified personnel. When performing replacement and installation at your own risk, you are obligated to always record the maintenance details in the maintenance logbook and keep it with the vehicle. Please note that we are not responsible for any accidents caused by defects associated with replacement.\n\u003cbr\u003e・Brake-related parts immediately after driving are hot. Please ensure that the pads and rotors have completely cooled down before performing replacement work.\n\u003cbr\u003e・The pads contain fibers that may prick your hands. Always wear work gloves when performing replacement work.\n\u003cbr\u003e・Brake pads are consumables. Always replace them when the friction material has worn down to 2mm.\n\u003cbr\u003e・Before replacing brake pads, always confirm that the brake pads and vehicle compatibility are correct. Never install, use, modify, or process the product for applications other than the applicable vehicle.\n\u003cbr\u003e・When replacing pads, be careful to prevent dirt or foreign matter such as oil or dust from adhering to the surface.\n\u003cbr\u003e・For vehicles with double disc specifications, always replace the brake pads on both sides simultaneously.\n\u003cbr\u003e・When installing (replacing) brake pads, refer to the service manual and check for scratches, ruptures, deformation, or abnormal friction material on the rotors, brake hoses, etc.\n\u003cbr\u003e・After replacing brake pads, perform sufficient break-in driving until the sliding surfaces make uniform contact. Immediately after replacement, the friction surfaces of the pads and rotors are not in complete contact, so the original braking force cannot be obtained.\n\u003cbr\u003e・When replacing, simultaneously inspect the brake fluid (oil), calipers, rotors, etc. The performance of brake pads is greatly affected by the quality of caliper maintenance, so if there are any defects or malfunctions, take appropriate measures promptly.\n\u003cbr\u003e・Using pads that have exceeded their wear limit can damage the rotors and lead to accidents, so regularly check the remaining pad material and for any other damage. If any abnormality is found, it is very dangerous, so discontinue use.\n\u003cbr\u003e・Be careful to prevent impacts such as drops on the brake pads. This can cause damage to the product, resulting in the inability to obtain original braking performance, and in some situations, can lead to accidents. Handle with sufficient care.\n\u003cbr\u003e・Do not use sintered grip pads on cast iron discs (rotors).\u003c\/p\u003e\n\n\u003cp\u003e■Notes\n\u003cbr\u003e※Images are for illustration purposes only. Includes products with different sizes and colors.\n\u003cbr\u003e※Product design and specifications are subject to change without notice. Please understand.\u003c\/p\u003e","brand":"ジクー(ZCOO)","offers":[{"title":"Default Title","offer_id":47344014983403,"sku":"zcoo-zrm-t002","price":8687.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1021\/9499\/files\/zcoo-zrm-t002.jpg?v=1768544151","url":"https:\/\/bikeman.jp\/en\/products\/zcoo-zrm-t002","provider":"バイクマン","version":"1.0","type":"link"}