Rear Spring VTR1000 SP-1

【HYPERPRO Hyperpro 22011331 Rear Spring VTR1000 SP-1 Suspension】
■Rear Spring
Suspension spring with a constant rising rate, uniquely designed by Hyperpro.
The spring rate constantly changes in response to suspension movement.
It maintains a state that is neither too soft nor too hard, and also provides the resilience needed during high-load cornering and sudden braking.
●Front springs come with the necessary amount of fork oil.
●Optimizes the caster change during braking before a corner, making it easier to transition to the next action. Absorbs small bumps during cornering, eliminating vibrations that would interfere with the rider.
●Unlike ordinary springs, there is no constant spring rate, so resonance does not occur.
●Springs wound by computer-controlled machines are shot-peened to remove minute surface scratches that can lead to performance degradation. Furthermore, after completion, each spring undergoes a performance inspection by a tester.
●In the Netherlands, Hyperpro's home country, all ambulance motorcycles are equipped with Hyperpro springs.
Compatible models
HONDA VTR1000 SP-1 '00～'01
Specifications
Spring part number: 293
Preload adjustment: POS 1-3
Sag value: 8mm
Compression adjustment: 10-15 clicks out
Rebound adjustment: 2 turns out (+/- 0.5)
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.