Rear spring Lowers approx. 20-45mm Hornet 600

【HYPERPRO Hyperpro 22011571 Rear Spring Lowering approx. 20-45mm Hornet 600 Suspension】
■Rear Spring
A lowering spring unique to Hyperpro that lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the spring's free length.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and maintains stability at deeper compression.
Compatible models
HONDA HORNET600 '05-'06
Specifications
Lowering: approx. 20-45mm
Spring part number: 536
Compression adjustment: None
Rebound adjustment: None
Setting notes: Sag value pos7=20mm/pos1=45mm/Install the fork with the lock nut tightened as much as possible onto the rod.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will stand more upright than stock due to the lowering.)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the settings to a lowering amount where the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware of this.