Rear Spring Lowering approx. 30mm CBR1000RR

【HYPERPRO Hyperpro 22011641 Rear Spring Lowdown Approx. 30mm CBR1000RR Suspension】
■Rear Spring
Hyperpro's unique lowdown spring, which lowers the ride height by changing the spring rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support when heavily loaded.
Compatible models
HONDA CBR1000RR '08-'11
HONDA CBR1000RR (ABS) '08-'11
Specifications
Lowdown: Approx. 30mm
Spring part number: 1355
Preload adjustment: POS. 1-2
Sag value: 35mm
Compression adjustment: 1.5 turns out ± 0.5
Rebound adjustment: 1.5 turns out (+/- 0.5)
Setting notes: Fork preload weakest / Fork static sag 26mm.
*When using the side stand, park the vehicle on a flat surface in first gear. (The vehicle will stand more upright than with the normal suspension due to the lowdown.)
*The vehicle balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Lowdown parts are designated components, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, please adjust the setting while ensuring the side stand can be used at the reduced ride height.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.