Rear Spring Lowering approx. 30mm CBR1000RR

【HYPERPRO Hyperpro 22011651 Rear Spring Lowdown Approx. 30mm CBR1000RR Suspension】
■Rear Spring
This lowdown spring, unique to Hyperpro, lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the spring's free length.
Enjoy the smooth ride of the Constant Rising Rate, which softly absorbs impacts and provides strong support deeper in the travel.
Compatible models
HONDA CBR1000RR '06-'07
Specifications
Lowdown: Approx. 30mm
Spring material number: 1305
Preload adjustment: POS 1-2
Sag value: 35mm
Compression adjustment: 15-18 clicks out
Rebound adjustment: 2 turns out +/- 0.5
Setting remarks: Fork preload weakest / Fork static sag 34mm / Comp 2T / Rebound 1T.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowdown, the vehicle will be more upright than normal.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are designated parts, so no procedure for structural modification is required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the lowdown amount to allow use of the side stand while performing settings.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.