Front Springs Lowers Approx. 25mm CBF1000

【HYPERPRO 22011810 Front Spring Low Down Approx. 25mm CBF1000 Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down spring lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which softly absorbs shocks and firmly supports at the end of the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
HONDA CBF1000 '06-'09
Specifications
Low down: Approx. 25mm
Spring material part number: 1006
Fork oil viscosity/oil level: SAE10/130mm
Preload adjustment: No adjustment
Sag value: 45mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Forks are installed with 10mm protrusion.
*When using the side stand, park on a flat surface in first gear. (The vehicle will stand more upright than with the normal ride height due to the low-down)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated parts, so no procedures for structural modification are required.
*For low-downs of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the setting while adjusting the low-down amount so that the side stand can be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.