Rear Spring Lowered by Approx. 25mm CB1000R

【HYPERPRO Hyperpro 22011851 Rear Spring, Low Down Approx. 25mm, CB1000R Suspension】
■Rear Spring
Hyperpro's unique lowdown spring lowers vehicle height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports at the end of its travel.
Compatible models
HONDA CB1000R '08～'16
Specifications
Low down: Approx. 25mm
Spring material number: 1305
Preload adjustment: POS 1
Sag value: 30-35mm
Compression adjustment: Not adjustable
Rebound adjustment: 1.5 turns out (+/- 0.5).
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than with the stock setup due to the lowdown.)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting to a lowdown amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.