Front Spring Lowering approximately 30mm CBR600F

【HYPERPRO Hyperpro 22012390 Front Spring Lowering Approx. 30mm CBR600F Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that lowers vehicle height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports at deeper compression.
Front springs come with the necessary amount of fork oil.
Compatible models
HONDA CBR600F '93～'98
Specifications
Lowering: Approx. 30mm
Spring component number: 1176
Fork oil viscosity/oil level: SAE10/130mm
Preload adjustment: 4-6th stage
Sag value: 40mm
Compression adjustment: None
Rebound adjustment: 10-12 clicks out
Setting remarks: Fork protrusion 21mm above top bridge.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will be more upright than normal due to the lowering.)
*The vehicle's balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering by more than 30mm, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, set the adjustment while ensuring the side stand can be used at the lowered height.
*Images are for illustration purposes only; product designs and specifications shown may change without notice. Please be aware of this.