Front Springs Lowering Approx. 20-45mm Hornet 600

【HYPERPRO 22012400 Front Spring Lowering approximately 20-45mm Hornet 600 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs, which lower the ride height by changing the spring rate and oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports the bike deeper into its travel.
The front springs come with the necessary amount of fork oil.
Compatible models
HONDA HORNET600 '98-'02
Specifications
Lowering: Approximately 20-45mm
Spring part number: 1113
Fork oil grade/level: SAE10/120mm
Preload adjustment: Not adjustable
Sag value: 50mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable.
*When using the side stand, park on a flat surface with the transmission in first gear. (Due to the lowering, the vehicle will be more upright than normal.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a shorter side stand may be required depending on the vehicle's condition. For models with adjustable preload, please adjust the setting while ensuring the side stand can be used at the lowered height.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.