Rear spring, lowered by approximately 25-30mm, Hornet 600

【HYPERPRO 22012441 Rear Spring Lowering approx. 25-30mm Hornet 600 Suspension】
■Rear Spring
Hyperpro's unique lowering spring reduces vehicle height through rate changes and oil level adjustment, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and provides firm support when pushed.
Compatible models
HONDA HORNET600 '03～'04
Specifications
Lowering: approx. 25-30mm
Spring Part Number: 536
Compression Adjustment: None
Rebound Adjustment: None
Setting Remarks: Preload pos7=20mm/pos1=45mm/Tighten the nut as much as possible to the rod before installing the fork.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will stand more upright than normal due to lowering.)
*After installation, the vehicle balance changes significantly. Always perform front and rear setting adjustments before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the bike while adjusting to a lowering amount that allows the side stand to be used.
*Images are for illustration purposes only. Product designs and specifications are subject to change without notice. Thank you for your understanding.