Front spring lower about 25mm CRF1000L

【HYPERPRO Hyperpro 22012850 Front Spring, Low-down approx. 25mm, CRF1000L Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down spring lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with a constant rising rate that gently absorbs impacts and provides firm support in the deeper stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
HONDA CRF1000L Africa Twin (ABS) '16-'18 (DTC compatible)
Specifications
Low-down: Approx. 25mm
Spring part number: 1641
Fork oil viscosity/oil level: 2X SAE15/180mm
Preload adjustment: 15 turns
Sag value: 70-80mm
Compression adjustment: 5 clicks out
Rebound adjustment: 1.5 turns out
Setting remarks: Fork extension 10mm.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will be more upright than normal due to the low-down setting.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered specified parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the preload to a low-down amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.