Front springs, lowered approx. 25mm, CB1000R

【HYPERPRO 22013300 Front Spring (Lowered by approx. 25mm) CB1000R Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that reduces vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports the bike deep into its travel.
Front springs come with the necessary amount of fork oil.
Compatible models
HONDA CB1000R '18-'22
Specifications
Lowering: Approx. 25mm
Spring material number: 1214
Fork oil grade/oil level: 2X SAE15/L125 R90mm
Preload adjustment: 14 turns
Sag value: 45mm
Compression adjustment: 4 turns out
Rebound adjustment: 3.5 turns out
Setting notes: Fork protrusion 5mm.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than with the standard height due to the lowering.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering by 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used with the lowered height.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.