Front spring lower about 25mm CRF1000L

【HYPERPRO Hyperpro 22013400 Front Spring Lowering Approx. 25mm CRF1000L Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and maintains stability in deeper compression.
The front spring comes with the necessary amount of fork oil.
Compatible models
HONDA CRF1100L Africa Twin '20-'22 (DCT available)
Specifications
Lowering: Approx. 25mm
Spring part number: 1641
Fork oil viscosity/oil level: 2X SAE15/180mm
Preload adjustment: 15 turns out
Sag value: 70-80mm
Compression adjustment: 5 clicks out
Rebound adjustment: 1.5 turns out
Setting notes: Extension amount 10mm.
*When using the side stand, park on a flat surface with the transmission in first gear. (The vehicle will be more upright than normal due to lowering)
*Vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the lowering amount to allow the side stand to be used while setting.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.