Front spring, approximately 25-30mm lowered, CBR250R

【HYPERPRO 22015210 Front Spring Lowering approx. 25-30mm CBR250R Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs, which lower the vehicle height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and maintains stability in the deeper stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
HONDA CBR250R '11-'16
HONDA CBR250R (ABS) '11-'16
Specifications
Lowering: approx. 25-30mm
Spring part number: 1354
Fork oil viscosity/oil level: SAE10/150mm
Preload adjustment: No adjustment
Sag value: 50-55mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Use genuine preload bush (100mm) / Install with fork protruding 10mm.
*When using the side stand, stop the vehicle on a flat surface in first gear. (The vehicle will be more upright than normal due to lowering.)
*After installation, the vehicle's balance will change significantly. Be sure to adjust the front and rear settings before riding.
*Lowering parts are designated parts, so structural modification procedures are not required.
*For lowering by more than 30mm, a short side stand may be required depending on the vehicle condition. For models with preload adjustment, set while adjusting to a lowering amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.