Front spring, approximately 10mm lower (VTR250, VTR-F)

【HYPERPRO 22015270 Front Spring Lowdown approx. 10mm VTR250 VTR-F Suspension Fork Spring】
■Front Spring
This lowdown spring, unique to Hyperpro, lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the spring's free length.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and firmly supports the vehicle deeper into the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
HONDA VTR250 '13-'17 (TYPE-LD not compatible)
HONDA VTR-F '13-'17 (TYPE-LD not compatible)
Specifications
Lowdown: approx. 10mm
Spring part number: 1519
Fork oil viscosity/oil level: SAE10/140mm
Preload adjustment: No adjustment
Sag value: 50mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting notes: Extension amount 10mm / Use the genuine 100mm spacer.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowdown, the bike will be more upright than normal.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting to a lowdown amount that allows the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.