Front springs Lowering approx. 25-30mm CBR125R

【HYPERPRO Hyperpro 22017080 Front Spring Lowering approx. 25-30mm CBR125R Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring reduces vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Experience a smooth ride with constant-rising rate that absorbs impacts flexibly and provides firm support deep in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
HONDA CBR125R '04-'10
Specifications
Lowering: approx. 25-30mm
Spring part number: 1350
Fork oil viscosity/oil level: SAE10/140mm
Preload adjustment: None
Sag value: 60mm
Compression adjustment: None
Rebound adjustment: None.
*When using the side stand, park the vehicle on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowering.)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so no structural modification procedures are required.
*For lowering exceeding 30mm, a shorter side stand may be required depending on the vehicle's condition. For models with preload adjustment, please set the lowering amount to allow for side stand use.
*The image is for illustration purposes only. The design and specifications of the products shown may change without notice. Please understand.