Front springs, approx. 30mm lowering MT-01

【HYPERPRO Hyperpro 22031490 Front Spring Lowdown Approx. 30mm MT-01 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowdown spring that lowers vehicle height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and firmly supports the bike deep into its travel.
The front spring comes with the necessary amount of fork oil.
Compatible models
YAMAHA MT-01 '05-'09
Specifications
Lowdown: Approx. 30mm
Spring material number: 1465
Fork oil grade/oil level: SAE10/140mm
Preload adjustment: 1st stage
Sag value: 48mm
Compression adjustment: None
Rebound adjustment: 12 clicks out
Setting remarks: Assemble with the tapered end facing up / Use the genuine 100mm spacer.
*When using the side stand, park on a flat surface with the bike in first gear. (The vehicle will stand more upright than stock due to the lowdown.)
*After installation, the vehicle balance will change significantly. Please ride only after performing front and rear suspension adjustments.
*Lowdown parts fall under the category of specified parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the preload to a lowdown amount that allows the side stand to be used, and then perform the setting.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.