Front springs Low down approx. 20mm MT-07

【HYPERPRO Hyperpro 22032200 Front Spring Lowdown Approx. 20mm MT-07 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowdown springs, which lower the vehicle height by changing the spring rate and oil level adjustment without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which flexibly absorbs shocks and provides firm support.
Front springs come with the necessary amount of fork oil.
Compatible models
YAMAHA MT-07 '14-'17
YAMAHA MT-07(ABS) '14-'17
Specifications
Lowdown: Approx. 20mm
Spring part number: 1518
Fork oil grade/level: SAE15/150mm
Preload adjustment: Not adjustable
Sag value: 40mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting notes: Use the stock 150mm spacer / Spring is 15mm shorter than stock.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowdown.)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, adjust the side stand to a lowdown amount that allows its use while setting.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Please be aware of this.