Front Springs Lowering Approx. 25mm MT-09

【HYPERPRO 22032210 Front Spring Lowdown approx. 25mm MT-09 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowdown spring lowers the ride height by changing the spring rate and adjusting the oil level, without significantly altering the spring's free length.
Enjoy a smooth ride with the constant rising rate that gently absorbs impacts and provides strong support at the end of the stroke.
The front spring includes the necessary amount of fork oil.
Compatible models
YAMAHA MT-09 '13-'16
YAMAHA MT-09 (ABS) '13-'16
Specifications
Lowdown: approx. 25mm
Spring part number: 1142
Fork oil viscosity/level: SAE15/150mm
Preload adjustment: 6th stage
Sag value: 30mm
Compression adjustment: No adjustment
Rebound adjustment: 0.5-1 turn back
Setting notes: Set the fork protrusion to 10mm. Install with the tapered end facing up.
*When using the side stand, park on a flat surface with the transmission in first gear. (Due to the lowdown, the vehicle will be more upright than normal)
*After installation, the vehicle's balance will change significantly. Be sure to perform front and rear adjustments before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the lowdown amount so that the side stand can be used while performing the settings.
*Images are for illustration purposes only. The design and specifications of the products shown may change without notice. Thank you for your understanding.