Front Springs Lowering Approx. 25mm MT-09

【HYPERPRO Hyperpro 22032360 Front Spring Lowering approx. 25mm MT-09 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs, which lower the ride height by changing the spring rate and oil level adjustment without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and holds strong at the deep end.
Front springs come with the necessary amount of fork oil.
Compatible models
YAMAHA MT-09(ABS) '17～'19
Specifications
Lowering: approx. 25mm
Spring part number: 1142
Fork oil grade/level: SAE10/150mm
Preload adjustment: 6th stage
Sag value: 30mm
Compression adjustment: 6-8 clicks back
Rebound adjustment: 6-8 clicks back
Setting remarks: Fork protrusion 15mm.
*When using the side stand, stop the vehicle on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowering)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the lowering amount to allow the side stand to be used while setting.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.