Front springs Lowered by approximately 20mm T-MAX530 SX

【HYPERPRO 22032410 Front Spring, Low Down Approx. 20mm for T-MAX530 SX Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down spring that lowers the ride height by changing the spring rate and adjusting the oil level without significantly altering the spring's free length.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and firmly supports at the end of the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
YAMAHA T-MAX530 SX '17-'18 (DX models not compatible)
Specifications
Low down: Approx. 20mm
Spring material number: 1138
Fork oil viscosity/oil level: SAE15/90mm
Preload adjustment: Not adjustable
Sag value: 40mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting notes: Fork protrusion 5mm.
*When using the side stand, stop on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the low-down)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, adjust the settings to a low-down amount where the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the product shown may change without prior notice. Please understand.