Front spring, lowered by approx. 20mm, for T-MAX530 DX

【HYPERPRO Hyperpro 22032440 Front Spring Lowering approx. 20mm T-MAX530 DX Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring reduces vehicle height through a change in rate and oil level adjustment, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and holds firm deeper into the stroke.
The front spring comes with the required amount of fork oil.
Compatible models
YAMAHA T-MAX530 DX '17-'19
Specifications
Lowering: approx. 20mm
Spring part number: 1138
Fork oil grade/level: SAE15/90mm
Preload adjustment: Not adjustable
Sag value: 40mm
Compression adjustment: Not adjustable
Rebound adjustment: Not adjustable
Setting notes: Fork protrusion 5mm.
*When using the side stand, park on a flat surface in first gear. (The vehicle will stand more upright than with the stock setup due to the lowering.)
*The vehicle's balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the preload to a lowering amount that allows the side stand to be used.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.