Front springs Low down approx. 20mm MT-07

【HYPERPRO Hyperpro 22032480 Front Spring, Low Down approx. 20mm, MT-07 Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down springs lower the ride height by changing the spring rate and oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with constant rising rate that flexibly absorbs shocks and provides firm support when pushed.
The front spring comes with the necessary amount of fork oil.
Compatible models
YAMAHA MT-07(ABS) '18～'21
Specifications
Low down: approx. 20mm
Spring part number: 1518
Fork oil grade/level: SAE15/150mm
Preload adjustment: No adjustment
Sag value: 40mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting notes: Assemble using the genuine 150mm spacer / Spring is 15mm shorter than genuine.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the low-down, the bike will be more upright than with standard suspension)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are designated components, so no structural modification procedures are required.
*For low-down of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, adjust the settings while ensuring the side stand can be used at the chosen low-down amount.
*Images are for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.