Rear spring, approximately 20mm lower, for XSR700

【HYPERPRO Hyperpro 22032501 Rear Spring Low Down Approx. 20mm XSR700 Suspension】
■Rear Spring
Hyperpro's unique low-down spring lowers the ride height by changing the spring rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs impacts flexibly and provides firm support when needed.
The front spring comes with the necessary amount of fork oil.
Compatible models
YAMAHA XSR700 '16-'20
Specifications
Low-down: Approx. 20mm
Spring part number: 1306
Preload adjustment: Stock position
Sag value: 30mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the low-down)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered designated parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with preload adjustment, please adjust the setting to a low-down amount that allows the use of the side stand.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.