Front spring, lowers approx. 25mm for Tracer 700

【HYPERPRO 22032540 Front Spring Lowering approx. 25mm Tracer 700 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant-rising rate that flexibly absorbs shocks and holds firm deep in the stroke.
Front springs come with the necessary amount of fork oil.
Compatible models
YAMAHA TRACER700 '20-'21
Specifications
Lowering: approx. 25mm
Spring part number: 1389
Fork oil grade/oil level: SAE10/140mm
Preload adjustment: Softest
Sag value: 40-50mm
Compression adjustment: None
Rebound adjustment: 6 clicks out
Setting notes: Install with 10mm fork protrusion / Brake hose bracket routing needs to be changed.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than with the stock setup due to the lowering.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so structural modification procedures are not required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, adjust the lowering amount so that the side stand can be used while performing the settings.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.