Rear springs, approx. 25mm lowering Tracer 900GT

【HYPERPRO Hyperpro 22032591 Rear Spring Lowering approx. 25mm Tracer900GT Suspension】
■Rear Spring
Hyperpro's unique lowering springs lower the ride height by changing the rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which absorbs impacts flexibly and provides strong support deeper in the stroke.
Compatible models
YAMAHA TRACER900 GT ABS '19～'20
Specifications
Lowering: approx. 25mm
Spring part number: 1752
Preload adjustment: HPA weakest
Sag value: 30mm
Compression adjustment: None
Rebound adjustment: 7 clicks back
Setting notes: Front preload set to weakest / forks installed with 15mm protrusion.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to the lowering, the bike will be more upright than with standard height)
*After installation, the vehicle balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, set the suspension while adjusting the lowering amount so that the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.