Front Spring Lowering approximately 40mm WR250R WR250X

【HYPERPRO 22035160 Front Spring, Low Down Approx. 40mm, WR250R WR250X Suspension Fork Spring】
■Front Spring
A low-down spring unique to Hyperpro that lowers the ride height by changing the spring rate and oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and provides firm support when fully compressed.
The front spring comes with the necessary amount of fork oil.
Compatible Models
YAMAHA WR250R '07～'16
YAMAHA WR250X '07～'16
Specifications
Low down: Approx. 40mm
Spring material number: 1552
Fork oil viscosity/oil level: 2X SAE7.5/100mm
Preload adjustment: No adjustment
Sag value: 80mm
Compression adjustment: 8-10 clicks
Rebound adjustment: 9-11 clicks
Setting notes: Fork protrusion 20mm
Accessories: 1.5L oil.
*When using the side stand, park on a flat surface in first gear. (Due to the low-down, the vehicle will stand more upright than with the normal suspension)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered specified parts, so structural modification procedures are not required.
*For low-downs of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the setting while adjusting the low-down amount so that the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Please understand.