Rear spring Lowered approx. 40mm WR250R WR250X

[HYPERPRO 22035161 Rear Spring Lowering approx. 40mm WR250R WR250X Suspension]
■Rear Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the rate and oil level adjustment without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which absorbs shocks flexibly and firmly holds at the deepest point.
The front spring comes with the necessary amount of fork oil.
Compatible models
YAMAHA WR250R '07-'16
YAMAHA WR250X '07-'16
Specifications
Lowering: approx. 40mm
Spring part number: 1553
Preload adjustment: 2-3mm
Sag value: 60mm
Compression adjustment: 2 clicks
Rebound adjustment: 1-2 clicks
Setting remarks: Set ride height to normal length.
*When using the side stand, stop the vehicle on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowering)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so structural modification procedures are not required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, make adjustments while ensuring the side stand can be used with the lowered amount.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.