Rear spring, approximately 25mm lower, YZF-R3

【HYPERPRO Hyperpro 22035271 Rear Spring Lowering approx. 25mm YZF-R3 Suspension】
■Rear Spring
A lowering spring unique to Hyperpro that lowers the ride height by changing the spring rate and oil level adjustment without significantly changing the free length of the spring.
Enjoy the smooth ride of a constant rising rate that flexibly absorbs shocks and holds its ground deep in the stroke.
Compatible models
YAMAHA YZF-R3(ABS) '15～'18
Specifications
Lowering: approx. 25mm
Spring Part Number: 1357
Preload Adjustment: POS 1
Sag Value: 35mm
Compression Adjustment: None
Rebound Adjustment: None.
*When using the side stand, stop on a flat surface in first gear. (The vehicle will be more upright than normal due to lowering.)
*After installation, the vehicle's balance will change significantly. Be sure to perform front and rear settings before riding.
*Lowering parts are designated components, so no structural change procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the lowering amount to allow the use of the side stand.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.