Front Spring Lowdown approx. 25mm MT-25

【HYPERPRO Hyperpro 22035290 Front Spring Lowering Approx. 25mm MT-25 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and oil level adjustment, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant-rising rate that softly absorbs shocks and provides firm support when fully compressed.
The front spring comes with the necessary amount of fork oil.
Compatible models
YAMAHA MT-25 '16～'19
Specifications
Lowering: Approx. 25mm
Spring part number: 1629
Fork oil grade/oil level: SAE15/140mm
Preload adjustment: None
Sag value: 25mm
Compression adjustment: None
Rebound adjustment: None.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowering.)
*After installation, the balance of the vehicle will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the lowering amount to allow the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.