Rear spring lowered by approximately 25mm GSX-R1000

【HYPERPRO Hyperpro 22051401 Rear Spring Lowdown Approx. 25mm GSX-R1000 Suspension】
■Rear Spring
Hyperpro's unique lowdown spring, which lowers the vehicle height by changing the rate and adjusting the oil level, without significantly changing the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate, which absorbs shocks flexibly and provides firm support when heavily loaded.
Compatible models
SUZUKI GSX-R1000 '07-'08
Specifications
Lowdown: Approx. 25mm
Spring material number: 1374
Preload adjustment: 5mm
Sag value: 34mm
Compression adjustment: Low speed 9-11 clicks out
Rebound adjustment: 10 clicks +/- 3 out
Setting notes: High-speed compression 3 turns out.
*When using the side stand, park the vehicle on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowdown.)
*The vehicle balance will change significantly after installation. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the preload to a lowdown amount that allows the side stand to be used, and then make the settings.
*The image is for illustration purposes only, and the design and specifications of the product shown are subject to change without notice. Please understand.