Front Spring Lowering approximately 25mm GSX-S1000 GSX-S1000F

【HYPERPRO Hyperpro 22051610 Front Spring Low Down Approx. 25mm GSX-S1000 GSX-S1000F Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down spring that lowers the ride height by changing the spring rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and holds firm deep in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible Models
SUZUKI GSX-S1000 '15-'22
SUZUKI GSX-S1000F '15-'20
Specifications
Low down: Approx. 25mm
Spring material number: 1091
Fork oil viscosity/oil level: SAE10/110mm
Preload adjustment: 5th stage
Sag value: 40mm
Compression adjustment: 2 turns
Rebound adjustment: 8 clicks out
Setting remarks: Install with the tapered end facing up / protrusion amount 10mm.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than with normal ride height due to the low-down)
*The vehicle's balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Low-down parts are considered designated parts, so no structural modification procedure is required.
*For low-downs of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the low-down amount to allow the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.