Front spring Lowered by approximately 20mm GSX-S750

【HYPERPRO 22051650 Front Spring Lowering approx. 20mm GSX-S750 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring lowers the ride height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and holds firm deep in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
SUZUKI GSX-S750 '15-'16
Specifications
Lowering: approx. 20mm
Spring part number: 1138
Fork oil grade/oil level: SAE15/100mm
Preload adjustment: 3rd-4th stage
Sag value: 35mm
Compression adjustment: None
Rebound adjustment: None
Setting remarks: Spring is 15mm shorter than stock/Use the stock 100mm spacer.
*Please install using the stock 100mm spacer.
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowering)
*The vehicle balance changes significantly after installation. Always adjust the front and rear settings before riding.
*Lowering parts are designated parts, so structural modification procedures are not required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, adjust the settings while ensuring the side stand can be used with the lowered amount.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.