Front spring: approximately 25mm lower GSX-R1000

【HYPERPRO Hyperpro 22051800 Front Spring Lowering approximately 25mm GSX-R1000 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and adjusting the oil level, without significantly altering the spring's free length.
Enjoy the smooth ride of the constant rising rate, which softly absorbs impacts and provides firm support deep in the stroke.
Front springs include the necessary amount of fork oil.
Compatible models
SUZUKI GSX-R1000 (ABS) '17-'21 (Overseas specification)
Specifications
Lowering: Approximately 25mm
Spring material number: 1414
Fork oil weight/oil level: SAE7.5/120mm
Preload adjustment: Softest
Sag value: 40mm
Compression adjustment: 5 turns
Rebound adjustment: 4 turns
Setting notes: Oil level is measured with the spring and guide case removed.
*When using the side stand, park on a flat surface in first gear. (Due to the lowering, the bike will stand more upright than stock.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowering parts are considered designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be necessary depending on the vehicle's condition. For models with adjustable preload, set the ride height while adjusting to a lowering amount where the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.