Rear spring lowered by approximately 25mm GSX-R1000

【HYPERPRO Hyperpro 22051801 Rear Spring Lowering approx. 25mm GSX-R1000 Suspension】
■Rear Spring
Hyperpro's unique lowering spring that lowers the ride height by changing the spring rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs shocks and maintains stability deep in the stroke.
Compatible models
SUZUKI GSX-R1000(ABS) '17-'21 Overseas models
Specifications
Lowering: approx. 25mm
Spring part number: 345
Preload adjustment: 1-5mm
Sag value: 30-35mm
Compression adjustment: High speed 3 turns / Low speed 2.25 turns
Rebound adjustment: 2.75 turns.
*When using the side stand, park on a flat surface in first gear. (The bike will be more upright than normal due to the lowering)
*The vehicle balance will change significantly after installation. Please make sure to adjust the front and rear settings before riding.
*Lowering parts are designated components, so no structural modification procedures are required.
*If lowering by more than 30mm, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, please adjust the preload to a lowering amount where the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Thank you for your understanding.