Rear spring, approximately 15mm lowering, Hayabusa

【HYPERPRO Hyperpro 22051821 Rear Spring, Lowered approx. 15mm, Hayabusa Suspension】
■Rear Spring
This is a low-down spring unique to Hyperpro, which lowers the vehicle height by changing the spring rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride provided by the constant rising rate, which flexibly absorbs shocks and firmly supports at the end of the stroke.
Compatible models
SUZUKI HAYABUSA '22
Specifications
Lowered: approx. 15mm
Spring material number: 468
Preload adjustment: 10mm
Sag value: 28mm
Compression adjustment: 7 clicks out
Rebound adjustment: 1 turn out
*When using the side stand, park on a flat surface with the bike in first gear. (The bike will be more upright than normal due to the lowering.)
*After installation, the balance of the bike will change significantly. Always adjust the front and rear settings before riding.
*Since lowered parts are considered designated parts, there is no need for structural modification procedures.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, please adjust the setting to a low-down amount where the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.