Front Springs Lowered Approx. 25mm for Gladius 400/650

【HYPERPRO 22053050 Front Spring Lowdown approx. 25mm for Gladius 400/650 Suspension Fork Spring】
■Front Spring
These Hyperpro lowdown springs lower the vehicle height by changing the spring rate and oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which softly absorbs impacts and provides firm support when pushed.
The front spring comes with the necessary amount of fork oil.
Compatible models
SUZUKI GLADIUS400(ABS) '09～'15
SUZUKI GLADIUS650 '09～'15
Specifications
Lowdown: approx. 25mm
Spring part number: 309
Fork oil grade/level: SAE10/110mm
Preload adjustment: 2nd-3rd stage
Sag value: 40-50mm
Compression adjustment: None
Rebound adjustment: None
Setting remarks: Use genuine 50mm preload bush / Forks installed with 3mm protrusion.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowdown)
*Vehicle balance will change significantly after installation. Always adjust front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the setting while ensuring the side stand can be used at the lowered height.
*Images are for illustration purposes only. The design and specifications of the products shown may change without notice. Please be aware of this.