Front springs for approximately 20mm lowering ER-6n ER-6f

【HYPERPRO 22071620 Front Spring Lowering approx. 20mm ER-6n ER-6f Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs, which lower the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which softly absorbs shocks and firmly supports at the end of the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI ER-6n '12～'16
KAWASAKI ER-6f '12～'16
Specifications
Lowering: approx. 20mm
Spring part number: 1113
Fork oil grade/oil level: SAE15/120mm
Preload adjustment: No adjustment
Sag value: 35mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Install with forks extended 15mm (stock is 7mm).
*When using the side stand, park the vehicle on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowering.)
*The vehicle balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Lowering parts are designated parts, so structural modification procedures are not required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle condition. For models with adjustable preload, adjust the setting while ensuring the side stand can be used with the lowered ride height.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.