Front springs lowering approximately 25mm Ninja 1000

【HYPERPRO 22071740 Front Spring Lowdown approximately 25mm Ninja 1000 Suspension Fork Spring】
■Front Spring
HYPERPRO's unique lowdown springs lower the vehicle height by changing the spring rate and oil level, without significantly altering the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate, which softly absorbs shocks and firmly supports the bike deep into its travel.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja1000 '11-'13
Specifications
Lowdown: Approximately 25mm
Spring Material Number: 621
Fork Oil Viscosity/Oil Level: SAE10/100mm
Preload Adjustment: Weakest
Sag Value: 40mm
Compression Adjustment: 0.5 turns out
Rebound Adjustment: 1 turn out
Setting Notes: Install with the tapered end up. Use the genuine preload bush.
*When using the side stand, park on a flat surface with the gear in first position. (Due to the lowdown, the bike will be more upright than normal.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting the lowdown amount so that the side stand can be used.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.