Front springs, ~15mm lower Ninja 400/R, Ninja 650

【HYPERPRO 22071840 Front Spring Lowdown approx. 15mm Ninja 400/R Ninja 650 Suspension Fork Spring】
■Front Spring
A lowdown spring unique to Hyperpro that lowers the vehicle height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of the constant rising rate, which flexibly absorbs shocks and holds firm deep into the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI Ninja650 '12～'16
KAWASAKI Ninja400 '14～'16
KAWASAKI Ninja400 (ABS) '14～'16
KAWASAKI Ninja400R '11～'13
Specifications
Lowdown: approx. 15mm
Spring part number: 1113
Fork oil weight/oil level: SAE15/120mm
Preload adjustment: No adjustment
Sag value: 40mm
Compression adjustment: No adjustment
Rebound adjustment: No adjustment
Setting remarks: Set fork protrusion to 10mm.
*When using the side stand, park on flat ground in first gear. (The vehicle will be more upright than normal due to the lowdown.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are considered designated parts, so no procedure for structural modification is required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, set the lowdown amount so that the side stand can be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.<