Front Springs, Low Down approx. 25mm, Versys 1000

【HYPERPRO 22071880 Front Spring, Low Down Approx. 25mm, Versys 1000 Suspension Fork Spring】
■Front Spring
Hyperpro's unique low-down springs lower the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate, which softly absorbs shocks and maintains stability at the end of the stroke.
Front springs come with the necessary amount of fork oil.
Compatible models
KAWASAKI VERSYS1000 '12～'14
Specifications
Low down: Approx. 25mm
Spring part number: 428
Fork oil viscosity/oil level: SAE10/110mm
Preload adjustment: 7th step
Sag value: 45mm
Compression adjustment: None
Rebound adjustment: 6 clicks out
Setting remarks: Forks should be installed with a 20mm protrusion / assembled with the taper facing up.
*When using the side stand, park the motorcycle on a flat surface with the transmission in first gear. (The motorcycle will stand more upright than normal due to the low-down)
*After installation, the balance of the motorcycle will change significantly. Always adjust the front and rear settings before riding.
*Low-down parts are considered specified parts, so no structural modification procedures are required.
*For low-downs of 30mm or more, a short side stand may be necessary depending on the condition of the motorcycle. For models with preload adjustment, adjust the preload to a low-down amount that allows the side stand to be used.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Thank you for your understanding.