Rear spring Lowered by approximately 25mm Versys 1000

[HYPERPRO 22071881 Rear Spring Lowdown Approx. 25mm Versys 1000 Suspension]
■Rear Spring
Hyperpro's unique lowdown spring lowers the vehicle height by changing the rate and adjusting the oil level, without significantly altering the free length of the spring.
Enjoy a smooth ride with the constant rising rate, which flexibly absorbs shocks and maintains stability deeper in the stroke.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI VERSYS1000 '12-'14
Specifications
Lowdown: Approx. 25mm
Spring part number: 1622
Preload adjustment: Weakest
Sag value: 35-40mm
Compression adjustment: No adjustment
Rebound adjustment: 1 turn out.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than with the standard setup due to the lowdown.)
*After installation, the vehicle's balance will change significantly. Always adjust the front and rear settings before riding.
*Lowdown parts are designated components, so no structural modification procedures are required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, please set the lowdown amount to allow the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware.