Front springs - approximately 30mm lowering - Versys 650

[HYPERPRO Hyperpro 22071890 Front Spring Lowdown Approx. 30mm Versys 650 Suspension Fork Spring]
■Front Spring
Hyperpro's unique lowdown spring, which lowers the vehicle height by changing the rate and adjusting the oil level without significantly changing the free length of the spring.
Enjoy the smooth ride of Constant Rising Rate, which softly absorbs shocks and firmly supports at the end of its travel.
Front springs come with the necessary amount of fork oil.
Compatible models
KAWASAKI VERSYS650 '07-'14
KAWASAKI VERSYS650(ABS) '07-'14
Specifications
Lowdown: Approx. 30mm
Spring material part number: 1474
Fork oil grade/oil level: SAE15/120mm
Preload adjustment: 5 turns (tighten)
Sag value: 50mm
Compression adjustment: No adjustment
Rebound adjustment: 0.5 turns (loosen)
Setting notes: Fork installed with 25mm protrusion.
*When using the side stand, park on a flat surface in first gear. (The vehicle will be more upright than normal due to the lowdown.)
*The vehicle balance will change significantly after installation. Always perform front and rear adjustments before riding.
*Lowdown parts are designated parts, so structural modification procedures are not required.
*For lowdowns of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with preload adjustment, adjust the lowdown amount so that the side stand can be used while performing the setting.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.