Front Springs, Low Down approx. 25mm, Versys 1000

【HYPERPRO 22071910 Front Spring Lowering Approx. 25mm for VERSYS1000 Suspension Fork Spring】
■Front Spring
Hyperpro's unique lowering springs, which lower the ride height by changing the rate and adjusting the oil level without significantly altering the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs shocks and provides firm support when compressed.
The front spring comes with the necessary amount of fork oil.
Compatible models
KAWASAKI VERSYS1000 '15-'18
Specifications
Lowering: Approx. 25mm
Spring part number: 428
Fork oil viscosity/oil level: SAE10/110mm
Preload adjustment: 7th stage
Sag value: 45mm
Compression adjustment: None
Rebound adjustment: 6 clicks back
Setting notes: Extension amount 20mm/Install with the tapered side up.
*When using the side stand, park on a flat surface with the bike in first gear. (Due to lowering, the bike will be more upright than normal.)
*After installation, the vehicle's balance will change significantly. Be sure to adjust the front and rear settings before riding.
*Lowering parts are designated parts, so no structural modification procedures are required.
*For lowering of 30mm or more, a short side stand may be required depending on the vehicle's condition. For models with adjustable preload, set the preload while adjusting to a lowering amount that allows the side stand to be used.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.